A1 Roofing Maidstone

As a homeowner in Kent, you take pride in maintaining your outdoor spaces, including your shed. One crucial aspect of shed maintenance is ensuring the roof is properly felted to protect it from the elements. At DK Roofing & Building Limited, we're happy to share our expertise on how to felt a pent shed roof in Kent.

• High-quality shed roofing felt
• Nails (specifically designed for roofing)
• Hammer
• Measuring tape
• Utility knife or sharp blade
• Safety gloves and goggles

Measure the length and width of your shed roof in centimeters (cm). Add 10-15 cm to each dimension to ensure a sufficient overlap. Cut the felt to the required size using a utility knife or sharp blade.

Clear the roof of any debris, dirt, or old felt. Ensure the surface is dry and free of any obstructions.

If your shed roof has a wooden surface, apply a layer of underlay material to provide a smooth surface for the felt. This step is crucial to prevent the felt from tearing or becoming uneven.

Begin by laying the felt at the bottom edge of the roof, ensuring it's aligned with the edge of the shed. Use nails to secure the felt, spacing them about 5-7 cm apart. Work your way up the roof, overlapping each piece by 10-15 cm. Use a hammer to tap the nails into place.

At the apex of the roof, overlap the felt by 20-25 cm to ensure a watertight seal. Use additional nails to secure the felt in place.

Use a utility knife or sharp blade to trim the excess felt at the edges of the roof. Ensure the felt is tightly secured to the shed's edges to prevent water from seeping underneath.